Sewing Machine Services Luton Ltd  

 

JANOME DOMESTIC SEWING MACHINES

 

 

LIMI SERVO X

F SERIES

AC SERVO FOR INDUSTRIAL SEWING MACHINES

　

　

　

　

COMPACT AND LIGHTWEIGHT CONTROL BOX
  • REALIZING A SMALLER AND LIGHT CONTROL BOX
THE SIZE HAS BEEN DOWNSIZED TO APPROXIMATELY HALF OF THE CONVENTIONAL MODELS CONTROL BOX (XC-E SERIES)  THE WEIGHT HAS BEEN REDUCED BY APPROXIMATELY 35%
POWERFUL FUNCTIONS
  • SETTING DATA SAVE FUNCTION
THE SETTING DATA FOR ONE MODEL CAN BE SAVED IN THE SIMPLE SETTING MODE.
MULTIPLE FUNCTION AND COMPATIBLE
  • VARIOUS FUNCTIONS PROVIDED
THE OPERABILITY AND FUNCTIONALITY OF THE XC-E SERIES ARE INCORPORATED!  THE CONTROL BOX CAN BE EASILY CONNECTED WITH THE SAME TYPE OF CONNECTOR AS THE XC-E SERIES.
THE NO. OF VIRTUAL INPUTS HAS BEEN INCREASED FROM 5 TO 16.
TWO ELECTROMAGNETIC VALVE OUTPUTS HAS BEEN ADDED MAKING COMPLIANCE WITH AUTOMATED MACHINES EASIER.
TWO TYPES OF INPUT SIGNAL FUNCTIONS AND EIGHT TYPES OF OUTPUT SIGNAL FUNCTIONS HAVE BEEN ADDED, ALLOWING VERSATILE INPUT/OUTPUT OPERATIONS TO BE REALIZED.
ONE SIMPLE SEQUENCE OUTPUT HAS BEEN ADDED, MAKING THE SETTING FUNCTIONS MORE POWERFUL AND ALLOWING VARIOUS OUTPUTS TO BE CREATED.
  • COMPATIBILITY
THE CONVENTIONAL XL-554 MOTOR, XC-KE-01P DETECTOR, XC-E500-Y CONTROL PANEL, XC-FM-1, XC-FM-2 AND LE-FA PRESSER FOOT LIFTERS, AND XC-CVS-2 VARIABLE SPEED PANEL CAN BE USED.
  • XC-E500-Y CONTROL PANEL IS USABLE
THE CONTROL PANEL IS COMPATIBLE WITH THE E SERIES !
・THE SETTINGS OF THE CONTROL BOX BELOW THE SEWING MACHINE TABLE CAN BE MADE WITH THE CONTROL PANEL 9ON THE TABLE.
・THIS CONTROL PANEL CAN ALSO BE USED TO SAVE AND COPY THE CONTROL BOX SETTING DATE.
USER-FRIENDLY FUNCTIONS
PERSONAL COMPUTER INTERFACE PROVIDED AS A STANDARD
USING THE SETUP SOFTWARE, THE SETTINGS CAN BE WRITTEN, READ AND SAVED IN A BATCH, AND THE SETTING DATE CAN BE MANAGED.
A PRODUCTION MANAGEMENT SYSTEM CAN BE STRUCTURED USING THE OPTIONAL COMMUNICATION UNIT.  THE PRODUCTION DATE CAN BE SUPPLIED TO A SYSTEM SUCH AS A PERSONAL COMPUTER, ETC.,

《OPTION : PERSONAL COMPUTER SETUP SOFTWARE》

・INTEL 80486DX AND ABOVE, WINDOWS 3.1 AND ABOVE.

・MEMORY : 16MB OR MORE

・OPEN HARD DISK SPACE : 10MB OR MORE

NOTE 1 : WINDOWS IS A REGISTERED TRADEMARK OF MICROSOFT CORPORATION.

              THE OTHER COMPANY NAMES AND PRODUCT NAMES ARE THE REGISTERED TRADEMARKS OR TRADEMARKS

               OF THE RESPECTIVE COMPANY.

              THE SOFTWARE MAY NOT RUN CORRECTLY DEPENDING ON THE PERSONAL COMPUTER BEING USED.

　

OPTIONS
CONTROL PANEL XC-E500-Y
AUTOMATIC PRESSER FOOT LIFTER

LE-FM-1 : ELECTROMAGNETIC TYPE (FOR 30V)

LE-FM-2 : ELECTROMAGNETIC TYPE (FOR 30V), FOR HIGH LOADS

XC-FM-1 : ELECTROMAGNETIC TYPE (FOR 24V)

XC-FM-2 : ELECTROMAGNETIC TYPE 8FOR 30V), FOR HIGH LOADS

LE-FA : PNEUMATIC TYPE (COMMON FOR 30V/24V)
VARIABLE SPEED PEDAL XC-CVS-2 : 3-SERIES PEDAL, FOR STANDING OPERATION SEWING MACHINE
LEVER UNIT (SEPARATED TYPE)

XC-CL-1-SET : FOR ONE STEP PEDAL HEELING (INSTALLATION PLATE, EXTENSION CABLE SET)

XC-CL-2-SET : FOR ONE STEP PEDAL HEELING (INSTALLATION PLATE, EXTENSION CABLE SET)
FOOT SWITCH

LE-CFT-2 : FOOT-OPERATED TYPE

LE-FM-CFT : KNEE OPERATED TYPE
SETUP SOFTWARE XCFJW3-SETUP : WINDOWS 3.1 AND ABOVE
COMMUNICATION UNIT XC-ENTEJ
EXTENSION CABLE

MOTOR CABLE (FOR 200V) : K14M52158002

DETECTOR CABLE 0.6M : K14M71324830

ENCODER CABLE 1.0M : K14M71725402

　

MOTOR AND CONTROL BOX TYPES
  • CONTROL BOX
TYPE OUTPUT POWER SUPPLY FUNCTIONS
NO. OF PHASES VOLTAGE
XC-FMFY-10-05 550W SINGLE-PHASE 100-120 FUNCTIONS SUCH AS AUTOMATIC THREAD TRIMMING, PRESSER FOOT LIFTING, PRESET STITCHING, BAR TACKING AND TACKING ARE ALL PROVIDED.  A SIMPLE SEQUENCE AND PERSONAL COMPUTER COMMUNICATION FUNCTION ARE ALSO PROVIDED.  EIGHT SOLENOID DRIVE OUTPUTS, TWO SOLENOID VALVE OUTPUTS AND ONE SMALL SINGLE OUTPUT ARE PROVIDED.  A TOTAL OF 15 INPUT TERMINALS IS PROVIDED, INCLUDING THE VARIABLE VOLTAGE INPUT.
XC-FMFYCE-20-05 *1 550W SINGLE-PHASE 200-240
XC-FMFY-20-05 550W

3-PHASE

SINGLE-PHASE *2

 200-240
  • MOTOR
TYPE POWER SUPPLY OUTPUT OUTPUT SHAFT
NO. OF PHASES VOLTAGE
XL-554-10(Y) SINGLE-PHASE 100-120 550W TAPERED SHAFT
XL-554-20(Y)

3-PHASE

SINGLE-PHASE *2

 200-240 550W TAPERED SHAFT

    NOTE 1 : TYPE 〔XC-FMFYCE 〕IS CE

                  MARKING TYPE (*1).

    NOTE. 2 : REFER TO THE

                   INSTRUCTION MANUAL FOR

                   HOW TO CONNECT THE

                   TYPES MARKED WITH (*2).

　

SPECIFICATIONS   APPLICATION  TO EACH SEWING MACHINE
POWER VOLTAGE (V) 100-120 200-240
MOTOR TYPE XL-554-10(Y) XL-554-20(Y)
CONTROL BOX TYPE XC-FMFY-10-05 XC-FMFY (CE)-20-05
RATED OUTPUT (W) 550
RATED SPEED (RPM) 3,000
MAX. SPEED (RPM) 3,600
RATED TORQUE (N/m) 1.76 (0.18KG-m)
SPEED CONTROL RANGE AT MACHINE SHAFT (RPM)

70-8,999

DEFAULT SETTING (250 TO 4,000)
MOTOR SHAFT 50-3,600
DETECTOR XC-KE-01P
ENVIRONMENT AMBIENT TEMPERATURE 5゜C - 40゜C
AMBIENT HUMIDITY 30%RH - 95%RH (WITH NO DEW CONDENSATION)
ALTITUDE 1,000M OR LESS ABOVE SEA LEVEL
WEIGHT (KG) NOTE 1 MOTOR : 8.7KG, CONTROL BOX 3.6KG
  TABLE OF APPLICATION TO VARIOUS SEWING MACHINES
FUNCTION/MODEL XC-FMFY
APPLICABLE SEWING MACHINE LOCK STITCH ◎
OVERーLOCK ◎
CHAIN STITCH ◎
ZIGZAG STITCH ◎
BLIND STITCHING ◎
◎ INDICATES THE THREAD TRIMMING FUNCTION.
ALL DIGITAL

・VARIOUS SETTINGS ARE POSSIBLE

   WITH THE ALL DIGITAL UNIT.

NOTE 1 : MAIN UNIT WEIGHT

・HIGH RELIABILITY POSSIBLE ONLY WITH

   AN ALL DIGITAL UNIT.

　

 

 


 
Useful Links
Copyright © 2004 Sewing Machine Services Luton Ltd   
Last modified: 02-Sep-2006